Tryag File Manager - Edit By Mr.SaHr

//proc/self/root/etc/named.iscdlv.key

# The bind.keys file is used to override the built-in DNSSEC trust anchors
# which are included as part of BIND 9.  As of the current release, the only
# trust anchors it contains are those for the DNS root zone ("."), and for
# the ISC DNSSEC Lookaside Validation zone ("dlv.isc.org").  Trust anchors
# for any other zones MUST be configured elsewhere; if they are configured
# here, they will not be recognized or used by named.
#
# The built-in trust anchors are provided for convenience of configuration.
# They are not activated within named.conf unless specifically switched on.
# To use the built-in root key, set "dnssec-validation auto;" in
# named.conf options.  To use the built-in DLV key, set
# "dnssec-lookaside auto;".  Without these options being set,
# the keys in this file are ignored.
#
# This file is NOT expected to be user-configured.
#
# These keys are current as of Feburary 2017.  If any key fails to
# initialize correctly, it may have expired.  In that event you should
# replace this file with a current version.  The latest version of
# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.

managed-keys {
        # ISC DLV: See https://www.isc.org/solutions/dlv for details.
        #
        # NOTE: The ISC DLV zone is being phased out as of February 2017;
        # the key will remain in place but the zone will be otherwise empty.
        # Configuring "dnssec-lookaside auto;" to activate this key is
        # harmless, but is no longer useful and is not recommended.
        dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
                brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
                1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
                ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
                Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
                QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt
                TDN0YUuWrBNh";

# ROOT KEYS: See https://data.iana.org/root-anchors/root-anchors.xml
        # for current trust anchor information.
        #
        # These keys are activated by setting "dnssec-validation auto;"
        # in named.conf.
        #
        # This key (19036) is to be phased out starting in 2017. It will
        # remain in the root zone for some time after its successor key
        # has been added. It will remain this file until it is removed from
        # the root zone.
        . initial-key 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
                FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
                bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
                X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
                W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
                Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
                QxA+Uk1ihz0=";

# This key (20326) is to be published in the root zone in 2017.
        # Servers which were already using the old key (19036) should
        # roll seamlessly to this new one via RFC 5011 rollover. Servers
        # being set up for the first time can use the contents of this
        # file as initializing keys; thereafter, the keys in the
        # managed key database will be trusted and maintained
        # automatically.
        . initial-key 257 3 8 "AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3
                +/4RgWOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kv
                ArMtNROxVQuCaSnIDdD5LKyWbRd2n9WGe2R8PzgCmr3EgVLrjyBxWezF
                0jLHwVN8efS3rCj/EWgvIWgb9tarpVUDK/b58Da+sqqls3eNbuv7pr+e
                oZG+SrDK6nWeL3c6H5Apxz7LjVc1uTIdsIXxuOLYA4/ilBmSVIzuDWfd
                RUfhHdY6+cn8HFRm+2hM8AnXGXws9555KrUB5qihylGa8subX2Nn6UwN
                R1AkUTV74bU=";
};